|
Installation
& Operating Manuals link
New HVAC Products from
Setra
Room Pressure Monitors,
Remote Wet/Wet dP's, Humidity Transmitters, Current Switches & Transducers.....
|
 |
Model
231RS Multi-Sense Remote Sensor Wet/Wet Differential Pressure Transmitter
Setra introduces the industry's FIRST Wet/Wet Differential Transducer
with Remote Sensors. 231RS with remote sensors reduces labor,
materials, and time. The sensors are installed directly into the pipe and
electrical connection is made between the remote sensors and the Model 231RS
via cables or conduit, reducing labor cost by one-third and the cost of
copper to connect the pressure transducer to the pipe. Startup time is
reduced since purging air out of the lines is not necessary. |
 |
Flush Mount Room Condition Pressure Monitor - Model
SRCM
The Model SRCM all inclusive design provides room
condition, room identification, security, calibration, and room pressure
status all in one unit. The CE compliant SRCM is also well suited to monitor
positive, negative or neutral air pressure. True differential pressure is
measured and displayed with configurable resolution to 0.0001 inches of
water column. |
 |
Model SRH Relative
Humidity Transmitter
Setra's family of humidity transmitters are offered in wall mount, duct
mount and outside air unit configurations. Each unit includes a field
replaceable sensor tip that allows the end user to replace the sensor
on-site, thereby, reducing costly factory calibration and down-time during
service intervals. These humidity transmitters combine capacitive sensing
technology with Setra's proven customer application specific integrated
circuit (ASIC). This unique combination assures reliable control of RH
levels from 0 to 100% with available accuracies to 2%, 3%, or 5%...read
more |
 |
Digital Current Switches
& Transducers
Setra's family of Current Switch Clamped (CSC), split core design, and
Current Switch Solid (CSS), solid core design, and the newly released
Current Transducer (CTC) offer an economical approach
to detecting small current loads. Utilizing magnetic current sensing
technology, these current switches are ideal for electric motors that drive
fans, pumps, and blowers, and for sensing the status of heating coils and
lighting. These units are offered with fixed and adjustable set points as
well as snap-on power relays for remote motor stop and start...read
more |
 |
Micro-Cal Model 869
Ultra Low Pressure Documenting Calibrator
The Model 869 Ultra-Low-Pressure Generating and Documenting Calibrator
is designed for air handling processes that require portable,
high-accuracy and low-pressure documenting calibration to certify pressure
needs. Designed for portability, this unit is battery powered and
offers a minimum of eight hours of operation on a full battery charge.
Its PC User interface is simple to use. Transducer profiles can be
easily stored and retrieved, and calibration data can be generated as
found and as left. Calibration certificates can also be printed to
document pressure calibration. |
 |
Model SRPM Room Pressure Monitor
Now with BACnet®
Pressure monitoring is critical in medical
and manufacturing environments that require protection and isolation of
living beings and sensitive processes. The SRPM is designed to monitor
positive or negative airflow in these environments per CDC guidelines. The
SRPM combines Setra's proven and patented very low pressure sensing
technology with the latest in electronics. A large graphic RGB back-lit
touch screen display allows fingertip access to menus that guide the user
through room setup, application, security, and calibration...read
more |
HVAC/R Pressure Transducers:
 |
Model 230:
This wet to wet differential pressure
transducer provides a high output without compromising your budget.
Unlike fluid filled sensors that can rupture, the Model 230's wetted
parts are all stainless steel. Unidirectional and bi-directional ranges
are available from ±1 to 100 psid, and choice of 0 to 5 VDC or 0 to 10
VDC, or 4 to 20 mA output. |
 |
Model 231:
The Model 231 "all in one" design provides
users with field accessible ranging, choice of output and field zeroing.
Choose from three configurable pressure transducers offering 8 switch
selectable pressure ranges from ± 5 psid up 50 psid, ±10 up to 100 psid
or ±25 up to 250 psid, and choice of 0-5 VDC, 1-5 VDC, 0-10 VDC or 4 to
20 mA output in each transducer. |
|
|
Model 231RS:
The Model 231RS incorporates the Model 231 "all in one" design
with REMOTE sensors. It provides
users with field accessible ranging, choice of output and field zeroing.
Choose from three configurable pressure transducers offering 8 switch
selectable pressure ranges from ± 5 psid up 50 psid, ±10 up to 100 psid
or ±25 up to 250 psid, and choice of 0-5 VDC, 1-5 VDC, 0-10 VDC or 4 to
20 mA output in each transducer. |
 |
Model 260:
Multi-Sense Model 260 - One Size Fits All -
Customer friendly features such as user selectable pressure ranges,
selectable analog outputs, a standard LCD and AC/DC excitation on
voltage output operations. At a standard accuracy of 1% FS, this unit is
the only multi-range transducer to provide fixed range performance for
all selectable ranges. (Available without an LCD Display.) |
 |
Model
264: Setra's versatile low differential pressure transducers are
widely used in the accurate measurement of pressures and flows for
proper building pressurization and air flow control. Optional accuracies
of ±0.4% FS and ±0.25% FS are available as well as the standard ±1.0%
FS accuracy. Pressure ranges as low as ±0.1"WC up to 100"WC
are standard, with10 PSI overpressure on all ranges. |
 |
Model
265: At ±1.0% Full Scale accuracy (±0.4%, ±0.25% FS optional),
Setra's Model 265 provides superior positive and negative pressure
sensing required for high efficiency, air-control systems. An optional
snap-on conduit enclosure, molded from high impact Lexan®, is available. |
 |
Model
267: (Available with optional LCD display.) - These units sense
gauge and differential pressure and are offered with a high level 5 VDC
or 10 VDC output as well as a 4-20 mA output. The Model 267 is available
with an optional LCD display for convenient viewing of pressure reading. |
 |
Model
267MR: Up to 6 field selectable pressure ranges (bi-directional and
unidirectional) in each unit. The simple flip of a dipswitch enables the
user to easily field calibrate the unit with minimal effort. These units
sense gauge and differential pressure and are offered with a field
selectable high level 5 VDC or 10 VDC output as well as a 4-20 mA
output. |
 |
Model
269: Designed for high performance applications such as those found
in critical medical and pharmaceutical environments. This unit is
offered in a din rail or base mount version and features easy to access
pressure ports and electrical connections. Pressure ranges are
available in ranges as low as 0.1 in.W.C. up to 10 in. W.C full scale.
with choice of ±0.25%, ±0.50% or ±1.0% full scale accuracy.
In addition, this unit can be configured with an optional visual display
for local viewing and 2:1 range turndown.
|
 |
Model
209/C209: Priced aggressively, these transducers meet the
performance requirements of refrigeration systems. The stainless steel/Valox
housing provides a rugged, lightweight package. A variety of pressure
ranges are available: gauge, sealed gage, and vacuum. |
 |
Model
206/C206/207/C207: Known for their rugged construction and
reliability, Setra's Model 206 and 207 pressure transducers and
transmitters exhibit resistance to shock, vibration, temperature and
EMI/RFI. These transducers are available in full scale pressure ranges
from 25 psig to 10,000 psig. |
HVAC/R Current Switches & Current Transducers:
 |
Model
CSS: The CSS solid core current switch's
convenient wide orifice allows easy pass through of the conductor,
making it ideal for new installations. These units are solid state
switches and have accurate very low fixed or user adjustable setpoints,
and are ideal for direct drive units, small exhaust fans, and other
fixed loads. |
 |
Model
CSC: The CSC split core design is ideal
for existing installations as it can easily be clamped onto existing
power cable or wires. These units are offered with industry standard 135
Amp or 200 Ampt output and very low fixed or adjustable setpoints.
Setpoints can be adjusted for over or under loads. |
 |
Model
CTC: The CTC Series are ideal for
monitoring current in PLCs (Power Line Carrier Communication) and AMR
systems or in remote control systems of SCADA sofrtware for automation
and supervision, security, condition monitoring in protection systems
and for the predictive maintenance of conveyers, pumps or HVAC motors. |
HVAC/R Humidity & Temperature Transducers:
 |
Model
SRH Wall Mount: Model SRH Humidity
Transmitter Series for HVAC/Building automation systems and other
relative humidity monitoring applications. The Model SRH humidity
transmitters are available with optional passive or active temperature
sensing. |
 |
Model
SRH Duct Mount: Model SRH Humidity
Transmitter Series for HVAC/Building automation systems and other
relative humidity monitoring applications. The Model SRH humidity
transmitters are available with optional passive or active temperature
sensing. |
 |
Model
SRH Outdoor Air: Model SRH Humidity
Transmitter Series for HVAC/Building automation systems and other
relative humidity monitoring applications. The Model SRH humidity
transmitters are available with optional passive or active temperature
sensing. |
Room Pressure Monitors - Critical Care HVAC:
 |
Model
SRPM: The
SRPM room pressure monitor is designed for critical low differential
pressure applications that require stringent pressure monitoring and
alarming. True differential pressure is measured and displayed with a
resolution of 0.0001" W.C. The SRPM is a complete system that includes a
convenient backlit RGB LCD display with an intuitive graphic user
interface for pressure, security, calibration, and alarm setup.
|
 |
Model
SRCM: The Model SRCM all inclusive
design provides room condition, room identification, security,
calibration, and room pressure status all in one unit. The CE compliant
SRCM is also well suited to monitor positive, negative or neutral air
pressure. True differential pressure is measured and displayed with
configurable resolution to 0.0001 inches of water column. |
Industrial OEM Pressure Transducers:
 |
Model 3100 and 3200
Series High Pressure/OEM Pressure Transducer: Designed for OEM
installations, the Model 3100 standard duty is compact, measuring less
than 1 inch in diameter, and offers exceptional 0.25% Full Scale accuracy
in pressure ranges from 75 psi up to 32,000 psi. Modifications to this
unit are not necessary because of the wide range of outputs, pressure
connectors, and electrical connectors available. In addition, voltage
units are available with a dual pressure/temperature output.
The Model 3200 Heavy Duty pressure transducer offers the same features as
the Model 3100 but is resistant to pressure spikes with maximum over-
pressure protection of 3 x full scale on pressure ranges from 75 psi up to
10,000 psi Full Scale. Pressure ranges up to14,500 psi over-pressures are
2.5 x full scale and pressure ranges up to 26,000 psi over-pressures are
1.7 x full scale. |
|
|
Model
206/C206/207/C207 OEM: Known for their rugged construction and
reliability, Setra's Model 206 and 207 pressure transducers and
transmitters exhibit resistance to shock, vibration, temperature, EMI/RFI
and environmental extremes found in industrial applications. These
transducers are available in pressure ranges from 25 psig to 10,000
psig. |
|
|
Model
209/C209 OEM: Priced aggressively, these transducers meet the most
demanding performance requirements of industrial OEM applications. The
stainless steel/Valox housing provides a rugged, lightweight package
designed to withstand the most stringent environmental conditions. A
variety of pressure ranges are available: gage, sealed gage, and vacuum. |
Test & Control Instruments:
 |
Model
ASM: Setra's Model ASM is a high
performance pressure transducer used in the accurate measurement of
pressures on engine test stands, dynamometers, particle test & analysis,
and research & development applications. Optional end-point accuracies
of ±0.05% FS and ±0.1% of reading are both available with 0.25% total
error band as well as the standard ±0.1% FS accuracy. Pressure ranges as
low as ±15 psi up to 1000 psi are standard, with an optional proof
pressure up to 10X. |
 |
Model
141: A highly accurate accelerometer that can maintain a stable
output even under the most extreme vibration and temperature conditions.
Along with its ability to withstand extreme vibration without damage,
the Model 141 can sense accelerations ranging from static acceleration
up to 3000 Hz. |
 |
Model
204/C204: Ideally suited to applications that require 0.1% accuracy.
The Model 204/C204 is versatile in its use and is well suited for
critical pressure measurement (gage, absolute, vacuum) in Laboratory,
Industrial and Aerospace applications.
Available in optional FM Approved Intrinsically Safe design. |
 |
Model
204D: Fast warm-up coupled with a fast response, less than 1
millisecond, make this transducer ideal for applications that require
the highest accuracy. This transducer is designed for accurate
differential pressure measurement of liquid or gases compatible with
17-4 PH stainless steel.
Available in optional FM Approved Intrinsically Safe design. |
 |
Model
280E/C280E: Affordability, rugged packaging, and an accuracy of
0.11% full scale (.073% FS, optional) combine to make these transducers
an excellent choice for the most demanding applications. Available in
gauge, absolute and vacuum pressure ranges. |
 |
Model
205-2: Low price and a high level output signal make this transducer
an ideal fit for applications found in Industrial, Laboratory, and
Aerospace applications. Available in gage or absolute pressure ranges
from 25 psi to 5000 psi.
Available in optional FM Approved Intrinsically Safe design. |
 |
Model
239/C239: Designed to measure low pressures, the Model 239/C239 is
available in unidirectional and bi-directional ranges as low as ±0.25'WC.
These transducers are ideally suited to a variety of applications such
as HVAC Control, Medical Instrumentation, Energy Management, Leak
Detection, Clean Rooms, and Environmental Testing.
Available in optional FM Approved Intrinsically Safe design. |
 |
Model
760: The Model 760 Vactron Series capacitance manometer is an
absolute pressure transducer designed for accurate and repeatable vacuum
measurements. All wetted surfaces are Inconel®. Access to
multi-turn potentiometers is through an integrated sliding cover. The
Model 760 operates from a ±15 VDC power supply and provides a 0 to 10
VDC or 0 to 5 VDC signal output. |
Barometric Transducers:
 |
Model
270: Known worldwide for its consistent reliability and outstanding
performance (±0.05% FS accuracy), the Model 270 has been used in
applications such as Weather Monitoring, Avionics Systems, and Crucial
Compensation of Barometric Pressure in Laser Interferometers. |
 |
Model
276: Low cost and high performance (±0.25% FS) make this pressure
transducer an exceptional value. This compact, environmentally rugged
pressure transducer is available with optional 0.1% FS accuracy, and 5
VDC excitation with 0.5 to 4.5 VDC output (for solar powered
applications). |
 |
Model
278: Designed for the environmental extremes found in Automated
Weather Systems (AWS), the 278 offers exceptional long-term stability -
better than 0.1 mb/yr. This unit is available in 500 to 1100 hPa/mb,
600 to 1100 hPa/mb, and 800 to 1100 hPa/mb pressure ranges with choice
of 2.5 VDC or 5 VDC output. |
 |
Model
370 Digital Pressure Gage: This highly accurate (0.02% FS)
self-contained instrument has a 6-digit LCD display and a numeric keypad
for access to engineering unit conversions. In addition, an RS-232
communications port is available for computer access. |
 |
Model
470: Has the same functionality as the Model 370, but does not
include the LCD display or numeric keypad. Used as the barometric
standard in Automated Surface Observation Systems (worldwide) where
accuracy, stability and versatility are essential. |
Specialty Transducers:
 |
Model
C-290: The Model C290 meets 3A sanitary standards. A flush diaphragm
design and tri-clover fitting make the C290 ideal for applications that
must withstand external high-pressure wash down and CIP/SIP cycles.
Standard accuracy is 0.20% FS. High accuracy option is available. |
Digital Displays:
 |
Model LD330:
The Model LD330 with Liquid Crystal Display (LCD), can be configured in
line between Setra's pressure transducer (or transmitter) and a data
acquisition system. Value is built in to the design with a rotatable
housing for optimum display viewing at any angle. |
 |
Datum
2000™: Dual Channel Meter or Manometer - The Datum 2000™ Dual
Channel Meter can be configured externally with one or two pressure
transducers or transmitters. The Datum 2000™ Manometer is a fully
self-contained unit with factory installed pressure transducer or
transmitter. |
Top of page
|
